Apollo LED Downlight TRI-COLOUR
NOW ONLY $11.95
9w LED downlight with CCT switch and Dimmable integral driver.
Features an LED colour temp changing dip switch located on the back of the downlight, allowing users to flick between Warm White, Neutral White and Cool White/Daylight. Round white fascia with recessed frosted diffuser. IP44 rated, allowing for use in wet areas such as bathrooms and outdoor undercover areas. Standard 90mm round cutout required. Dimmable with most leading edge and trailing edge dimmers. High 85+ CRI (colour rendering index), unlike many other budget downlights!
Each unit comes with the downlight and 60cm flex and plug.
IC-4 rated allowing for covered and abutted to insulation use.
COMES WITH A 5 YEAR AUS-WIDE WARRANTY
FAQ: HOW COME THIS DOWNLIGHT COMES WITH SUCH A LONG WARRANTY?
ANSWER: The Apollo downlight has a unique built-in LED driver which is SEPARATED from the heat sink on the back of the downlight- there is a small gap in between. This ensures that the LED driver is subject to far less heat than that of other downlights with in-built drivers, which helps BOTH the longevity of the driver and the ability of the downlight to get rid of heat- maybe the biggest enemy of most LEDs.
CHOOSE FROM 3 POPULAR LIGHT SETTINGS:
With a flick of the dip switch on the back of the downlight you can choose the desired light setting in each room of your house.
WW- Warm White, 3000K- eg. Living rooms, bedrooms
NW- Neutral White, 4000K- eg. Hallways, kitchens
CW- Cool White/Daylight, 5000K- eg. Laundries, bathrooms
- Cutout required:
- Voltage: 220-240V ~ 50Hz
- Power consumption: 9w
- Light colour options: Warm White | Neutral White | Cool White
- Lumen output: 750lm | 800lm | 850lm
- Colour Temp: 3000K | 4000K | 5000K
- Beam angle: 100°
- Dimmable: Yes- leading and trailing edge
- Warranty: 5 years
- CRI: 85+
- IP rating: IP44
- IC rating: IC-4
Cutout- Ø90mm diameter
Fascia- Ø103mm diameter
Unit depth- 55mm